Mainline Products
Mainline Products
Sidebar

Tell us about your Project

Product type

Rivet Body Length

Rivet Body Diameter

Rivet Head Diameter

Drill Bit Type

Panel Brand

Trespa Cladding Fixings

Trespa® produce one of the widest panel thickness ranges in the rainscreen façade industry, and the fixings needed vary depending on which you are working with. This range covers all four thicknesses: 6mm, 8mm, 10mm and 13mm, with the correct rivet, screw, centralising tool and drill bit for each combination. Every rivet and screw can be color-matched to your Trespa® panel finish before it leaves us.

Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Aluminium/Stainless Dome Head Large Flange Rivet - 5 x 18 x 16 - 100 Pack - Mainline ProductsAluminium/Stainless Dome Head Large Flange Rivet - 5 x 18 x 16 - 100 Pack - Mainline Products
    Choose options

    Aluminium/Stainless Dome Head Large Flange Rivet - 5 x 18 x 16mm

    from $62.00
    from $62.00
    Dome Head Large Flange Rivets for 6 & 8mm Trespa® panels only. For 10 and 13mm panels, see our 5 x 25 x 16mm rivets. Technical Specifications: Body Material Aluminium Stainless Mandrel Material 304 Stainless Steel Head Type Dome Head Flange Size Large Box...
    from $62.00
    from $62.00
    Choose options
  • Aluminium/Stainless Dome Head Large Flange Rivet - 5 x 25 x 16 - 100 Pack - Mainline ProductsAluminium/Stainless Dome Head Large Flange Rivet - 5 x 25 x 16 - 100 Pack - Mainline Products
    Choose options

    Aluminium/Stainless Dome Head Large Flange Rivet - 5 x 25 x 16mm

    from $65.00
    from $65.00
    Dome Head Large Flange Rivets for 10mm and 13mm Trespa® panels only.
    from $65.00
    from $65.00
    Choose options
  • Picture of the Centralising Tool Product from the front, without a drill bit inserted.Picture of the Centralising Tool Product from the side

    Centralising Drilling Tool - 9.5 x 5.1mm

    $328.00
    $328.00
    Our Centralising Tool is a precision-engineered tool designed for facade panel installers and contractors during the panel preparation process. This tool features a 9.5mm nose diameter and comes with a 5.1mm (diameter) drill bit.
    $328.00
    $328.00
  • A Centralising Tool Replacement Drill BitCentralising Tool Drill Bit Installed to Tool

    Centralising Tool Drill Bit - 5.1mm

    $28.00
    $28.00
    Our replacement drill bits for our range of centralising tools keep you drilling accurately for longer. This drill bit is suitable for our metal centralising tools.
    $28.00
    $28.00
  • HSS Step Drill Bit - 5.1mm x 19mm - 1 Pack - Mainline Products

    HSS Step Drill Bit - 5.1mm x 19mm - 1 Pack

    $97.00
    $97.00
    A strengthened HSS Drill Bit, used for drilling through both aluminium sub frame and cladding simultaneously.
    $97.00
    $97.00
  • Rivet Setting Nose Piece HexRivet Setting Nose Piece - K16

    Rivet Setting Nose Piece - K16

    $102.00
    $102.00
    Our Stand-Off Nose Piece are precision-machined attachments that screw onto common rivet installation tools, to ensure the rivet is set 0.3mm away from the panel. This is to accommodate thermal expansion and contraction of the rainscreen panel after installation. This K16 features a hexagonal...
    $102.00
    $102.00

What Trespa® panels are available?

Trespa® manufacture high-performance HPL rainscreen panels, that stands for high-pressure laminate. It is a dense, smooth composite material with very different drilling characteristics from fibre cement. This matters when it comes to choosing the right drill bit for your installation.

Trespa® panels are used extensively on commercial and residential façade projects globally, vlaued for their surface consistency, weather resistance and the wide range of colours and finishes available. Panels come in four thicknesses, 6mm, 8mm, 10mm and 13mm, and the thickness determines which rivet you need.

Which Rivet do I need for my Trespa® Panel?

Trespa® specifies aluminium/stainless large flange dome head rivets with a 16mm head diameter for face-fixing panels to metal subframes. Both rivets on this page share that 16mm head and a 5mm body diameter. The difference is in the grip range: 

  • 6mm and 8mm Trespa® panels: 5 x 18 x 16mm rivets
  • 10mm and 13mm Trespa® panels: 5 x 25 x 16mm rivets

Because both rivets share the same 16mm head diameter, a single nose piece, the K16, covers both. Check your panel thickness before ordering and refer to your Trespa® installation guide if you are unsure.

Both rivets are available unpainted or color-matched in Standard, Gloss, Woodgrain, Metallic or Chameleon finishes. 

Which Screws are specified for Trespa® Panels?

A2 stainless steel low profile screws (4.8 x 38 x 12mm) are specified for face-fixing 6mm, 8mm and 10mm Trespa® panels to timber substructures. Note that 13mm Trespa® panels are rivet-fixed only; there is no screw option for that thickness. All screws in our range can be color-matched to your panel finish. Only the head is painted; the thread stays unpainted, so the fixing performance is not compromised.

What installation tools do I need?

Three tools are needed for a correct Trespa® panel installation:

  • Centralising drilling tool: Two versions available, depending on your subframe. The 9.5 x 5.1mm tool is for metal subframes, producing a 10mm sliding point holes with a 5.1mm drill bit. The 7.5 x 3mm tool is for timber subframes, drilling a 3mm pilot hole concentric to an 8mm sliding point. Replacement drill bits, 5.1mm for the metal tool, 3mm for the timber tool, are available separately.
  • HSS step drill bits - 5.1mm x 19mm: For drilling through aluminium subframe and Trespa® cladding simultaneously. Unlike fibre cement, Trespa® is an HPL panel and HSS is the correct bit type. Do not use carbide bits design for fibre cement on Trespa® panels.
  • Rivet setting nose piece - K16: Used with both rivets on this page, setting each one exactly 0.3mm away from the panel face to allow for thermal movement after installation.

The Trespa® Panel Installation Kit bundles the centralising tools, nose piece and drill bits together, a practical starting point if you are setting up for a Trespa® project from scratch.

Can my Trespa® Fixings be color-matched?

Every rivet and screw on this page can be factory painted to an exact match for your Trespa® panel, whether you are working to a RAL reference, a BS colour code or a paint-to-sample match from the panel itself. The head is painted before it leaves us. The match is guaranteed. 25-year coating warranty on all painted fixings. Free sample packs are available, which is a good idea given how visible the fixing head sits against a Trespa® surface.

Recently Viewed Products