EJOT Fixings and Fasteners

EJOT JT3 LT Self Drilling Fasteners are a self-drilling screw that are commonly used to fix facade claddings to aluminium and steel substructures. The pan head covers slotted holes and larger pre-drill diameters, and the fixing can be combined with EJOT LT-TD fixed and sliding point grommets to allow for thermal movement. The A2 stainless construction suits weather-exposed facade positions.

EJOT JT3 LT Self Drilling Fasteners are a self-drilling screw that are commonly used to fix facade claddings to aluminium and steel substructures. The pan head covers slotted holes and larger pre-drill diameters, and the fixing can be combined with EJOT LT-TD fixed and sliding point grommets to allow for thermal movement. The A2 stainless construction suits weather-exposed facade positions.

EJOT JT4 FR Self Drilling Fasteners are a self-drilling screw that are commonly used to fasten corrugated and profiled aluminium sheets and facade panels to aluminium substructures. The self-drilling point fixes into substructures up to 3mm in one operation, so no pilot hole is needed. The A2 stainless construction suits weather-exposed facade and cladding positions.

EJOT JA3 LT Self Tapping Fasteners are a self-tapping screw that are commonly used to fix profiled steel and aluminium sheets to timber substructures. The low-profile pan head suits rainscreen and cladding positions, and the A2 stainless construction gives corrosion resistance in weather-exposed builds. The screw forms its own thread as it drives, so no separate tapping step is needed.

EJOT JA3 LT Self Tapping Fasteners are a self-tapping screw that are commonly used to fix profiled steel and aluminium sheets to timber substructures. The low-profile pan head suits rainscreen and cladding positions, and the A2 stainless construction gives corrosion resistance in weather-exposed builds. The screw forms its own thread as it drives, so no separate tapping step is needed.

EJOT JT3 LT Self Drilling Fasteners are a self-drilling screw that are commonly used to fix facade claddings to aluminium and steel substructures. The pan head covers slotted holes and larger pre-drill diameters, and the fixing can be combined with EJOT LT-TD fixed and sliding point grommets to allow for thermal movement. The A2 stainless construction suits weather-exposed facade positions.

EJOT JT4 FR Self Drilling Fasteners are a self-drilling screw that are commonly used to fasten corrugated and profiled aluminium sheets and facade panels to aluminium substructures. The self-drilling point fixes into substructures up to 3mm in one operation. The A2 stainless construction suits weather-exposed facade and cladding positions.

EJOT JF3 STX Self Drilling Fasteners are a self-drilling screw that are commonly used to fix standing seam clips and profiled sheets to steel and aluminium substructures. The bi-metal construction combines an A2 stainless body with a hardened carbon steel pierce point for corrosion resistance in exposed roofing and cladding. The Torx recess gives positive, controlled driving.

EJOT JT3 FR Self Drilling Fasteners are a self-drilling screw that are commonly used to fasten corrugated and profiled steel or aluminium sheets to thin steel substructures of 1mm to 2.5mm. The A2 stainless body with a hardened carbon steel drill point suits weather-exposed roofing and cladding. A pre-assembled sealing washer gives a weathertight fixing on the exposed sheet.

EJOT JT3 FR Self Drilling Fasteners are a self-drilling screw that are commonly used to fasten profiled steel and aluminium roofing and cladding sheets to steel substructures. The A2 stainless body with a hardened carbon steel drill point suits weather-exposed positions. A pre-assembled sealing washer gives a weathertight fixing on the exposed sheet.

EJOT JT3 FR Self Drilling Fasteners are a self-drilling screw that are commonly used to fasten profiled steel and aluminium roofing and cladding sheets to steel substructures. The A2 stainless body with a hardened carbon steel drill point suits weather-exposed positions. A pre-assembled sealing washer gives a weathertight fixing on the exposed sheet.

EJOT JT3 FR Self Drilling Fasteners are a self-drilling screw that are commonly used to fasten profiled steel and aluminium roofing and cladding sheets to steel substructures. The A2 stainless body with a hardened carbon steel drill point suits weather-exposed positions. A pre-assembled sealing washer gives a weathertight fixing on the exposed sheet.

EJOT Duro PTS Self Tapping Fasteners are a self-tapping screw that are commonly used for the concealed fixing of facade brackets and agraffes to aluminium substructures and anchor rails. The screw forms its own thread in a pre-drilled hole, giving a secret-fix with no visible fastener on the panel face. Full A4 stainless steel construction suits it to weather-exposed facade positions.

EJOT Duro PTS Self Tapping Fasteners are a self-tapping screw that are commonly used for the concealed fixing of facade brackets and agraffes to aluminium substructures and anchor rails. The screw forms its own thread in a pre-drilled hole, giving a secret-fix with no visible fastener on the panel face. Full A4 stainless steel construction suits it to weather-exposed facade positions.

EJOT Duro PTS Self Tapping Fasteners are a self-tapping screw that are commonly used for the concealed fixing of facade brackets and agraffes to aluminium substructures and anchor rails. The screw forms its own thread in a pre-drilled hole, giving a secret-fix with no visible fastener on the panel face. Full A4 stainless steel construction suits it to weather-exposed facade positions.

EJOT JT6 FR Self Drilling Fasteners are a self-drilling screw that are commonly used to fasten profiled steel and aluminium roofing and cladding sheets to steel sections. The JT6 point has a higher drilling capacity for fixing into medium and thicker steel purlins and rails. A pre-assembled sealing washer gives a weathertight fixing on the exposed sheet.

EJOT JT4 S Self Drilling Fasteners are a self-drilling screw that are commonly used to fasten timber battens and profiled panels to thin metal substructures in rear-ventilated facade builds. The drill point cuts through the substructure and forms its own thread in one operation, so no pilot hole is needed. The JT4 range is chosen where a corrosion-resistant stainless fixing is required into aluminium or steel sections.